1/8 & 1/4 DIN Digital Indicating Controller Shinko ACR & ACD Series

Submitted by usashinko on Wed, 03/03/2010 - 15:59

 

1/8 & 1/4 DIN Digital Indicating Controller Shinko ACR & ACD Series

Shinko North America Limited introduces the ACR, ACD Series digital indicating controller. A variety of functions extend the possibility of the SHINKO ACR & ACD controller including a guaranteed Dual output, Programmable alarm, Analog transmission, Heater burnout alarm, RS-485, RS-232C communications, Remote setting, Transmitter power supply, Event input, and Event output.



Industry Leading Large Display

Multi-Functions, Simple to Operate

ACD-13A, ACR-13A_photo



Features:

Large LCD display

A specially treated large LCD display makes it easier to view even in bright light and open-air.

PV display (ACD series): 24.0mm X 11.0mm (H XW)
ACD-13A_LCD_display
An easily viewable bar graph

22-segment bar graph allows simultaneous PV, SV, MV viewing.

Ease of viewing for manual output operation.

For the ACD-15A and ACR-15A, the motor valve opening can be checked with the bar graph.

(When feedback potentiometer "Yes" is set.)		 ACD-13A_bar_graph
Enhanced visibility

PV display color selectable from red, green and orange. Colors can be set depending on the deviation between PV and SV, so status can be checked from a distance.		 ACD-13A_LCD_display
PID zone function: PID resetting due to SV change Unnecessary

Up to 5 groups of PID parameters can be set. When SV is changed, PID parameters are automatically changed for optimal contol. (It is not necessary to reset PID after SV is changed.)
ACD-13A_Control_OFF_PV

Simple Operation in Simplified setting mode

Without setting engineering items, simplified settting mode can prevent operational mistakes, and simple operations run smoothly. Basic settings and key operations now are doable via 3-key usage.

 

 
ACD-13A_keys
Power unnecessary if USB comm. cable used

If CMB-001 USB communication cable (sold seperately) is used, a power supply for the controller is not necessary. Wiring for the initial setting is reduced. Data logging and monitoring can be carried out via the monitoring sofeware (sold seperately).
Console software(SWS-AC001M)



 

 
The 1/8 & 1/4 DIN Digital Indicating Controller Shinko ACR & ACD Series features

a full 3 year warranty and lifetime technical support!



Download: Comparison Table of MA-Series and AC-Series
Download: ACD & ACR Series Catalog
Download: ACD & ACR Series Manual