HandHeld Thermometer/Hygrometer -Shinko DFT-700

Submitted by usashinko on Wed, 03/03/2010 - 16:05

HandHeld Thermometer/Hygrometer -Shinko DFT-700

Specifications

  • MultiInput
    Units offer 4 thermocouple inputs and 1 RTD input.As Hygrometer units use RTD input and humidity sensorwith 0-1vDC
    (corresponds to 0-100% RH)
  • IndicatingAccuracy
    Input:
    Thermocouple: ±0.2% of full scale ±1digit
    RTD: ±0.1% of full scale ±1 digit

    Input:
    Temperature/Humidity Sensor
    Temperature: ±0.3ºC
    Humidity: ±0.3% RH

  • InputSampling Rate
    0.4 seconds
  • FunctionKey Settings
    POWER key: turns DFT-700-M ON or OFF.
    MODE key: holding this key for approximately1 second switches the measuring mode between regularand peak hold.
    HOLD/RST key: holding this key retains thetemperature or humidity data at that time, pressingkey again resets the data.
    MEMO key: pressing this key starts data memorymode.
    SAVE key: pressing this key saves the measuredvalue indicated on the PV display.
    LIGHT key: pressing this key turns the backlighton (backlight turns of in approximately 10 seconds).
  • PowerSupply
    3v DC - 2 AA alkaline batteries. Battery life: Thermometer- 200 hours. Hygrometer - 100 hours.
  • Structure
    Dimensions: W56 x H144 xD30mm.
    Weight: Approximately 90 grams.
    Dust-Proof/Drip-Proof: IP65 rated.

Download: DFT-700 Series Brochure

Download: DFT-700 Series Manual